Markacc Posted September 21, 2021 Posted September 21, 2021 Hi, The front nearside parking sensor on my 2011 CRV went wrong - dashboard displayed Check System and indicated which sensor was faulty. I replaced the sensor - the problem changed but did not go away. Now I do not get any faulty sensor indications - but as soon as I drop below 5mph - even if nothing within 100 metres of the car - the dashboard indicates that there is an obstacle close by - in other words the sensor reacts. Is there a way of rebooting the system, or maybe the sensor control module is faulty? I have seen these for sale but cannot find where they are located on the car - no mention in any manual I can find. Any suggestions would be appreciated Mark
Trevor Posted September 24, 2021 Posted September 24, 2021 I wonder if the sensor resistance is different from the others....worth taking a reading from the new one and an existing one to compare.
paulwatson Posted February 11, 2022 Posted February 11, 2022 I read an article from someone who said he had spent a lot of time on parking sensors and had never seen a duff one yet or one that could not be repaired by driving the water out of it with wd-40 and sealed after with varnish.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now