Jump to content

Remote control not working after battery change


ec5780

Recommended Posts

My remote control was becoming slower and slower to respond, and it got to the point where I had to press it multiple times for it to open/lock the car.

 

I changed the battery, and at the time I remember having some trouble getting it to work. Initially it refused to work and then after pressing the buttons a few times it started to work. This was in early August.

Then last week I went out; when I unlocked the car it worked perfectly but when I came to lock the car the remote control was completely dead. No gradual degradation like I had last time, and the battery was changed only a couple of months ago. I was able to lock the car with the key, but when I unlocked the car it set the alarm off!

 

I suspect the battery is bad, but it's strange that it failed so suddenly, and so soon, as opposed to the previous battery which wore out gradually over a much longer period of time.

 

Any thoughts? (And is there any other way to turn off the alarm if the remote control isn't working?)

Link to comment
Share on other sites

  • 2 weeks later...

I measured the battery voltage with a multimeter. It was around 2.3V when it should have been 3.3! I guess one of the cells inside the battery must have suddenly failed to cause such a sudden voltage drop.

 

I replaced the battery with another of the same batch and so far, so good.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...