CR-V 2001 to 2006

Hi, I want to use a fault reader but can't find where to plug it in.crv 2005 2.2 executive. Thanks Carlos

Initially the master cylinder flange bolt broke off when I pushed in the clutch stopping at a light. I replaced both master and slave even though they had been replaced a year and half before. Although the shop put the clutch slave pin in the wrong way with the rounded end inside the cylinder. I'm not sure if this is what caused the master to blow. I ended up replacing the metal tube/line from the slave cylinder because I bent it trying to tighten the connection in the top of the slave. Now I've bleed the system with a gravity kit I hooked up to the slave. I got my kid to pump the clutch with the bleeder valve closed then opened with pedal to the floor. I did this sever…

Hi, we have got a 2006 diesel Honda CRV, which has been in the garage since Christmas! It has totally baffled them, engine management light wont go off and it keeps going into limp mode. ECU unit has been sent off twice but no fault codes showing up, mechanic has changed loads of bits and done everything he can think of that would be causing the problem but still nothing, he has spoken to Honda several times but still not working. Wondering if trying a new engine wiring loom would help but they seem to be hard to get hold of. If anyone knows of one that would be great. The product number of the one we are looking for is 32110-rma-eo03.

Hi can anybody help i have a Honda CR-VCTDISPORT 2006 . I HAVE PURCHASED FROM EBAY 2 PARCEL SHELFS BUT WHEN YOU FIX IT TO THE SIDES THEN PULL OUT THE BLIND ITS TWO SHORT TO CLIP IN THE SIDES. I HAVE PURCHASED TWO AND WAS TOLD THAT THERE FOR MY model BUT I HAVE HAD TO SEND BOTH BACK AS THEY DONT FIT. ANYBODY SELLING ONE OR COULD YOU TELL ME WHAT BONE I NEED .

Hi all, I have a leak in the power steering hose of my CRV MK2 2.2 Diesel 2005-2006 RHD. Please see the attached image for where it is leaking and image of what the whole part looks like. I took my car to the garage and they couldn't get any genuine replacement parts so they wouldn't fix it. I have been looking online but I can only see replacements for either 2007 Honda's, 2006 Petrol or LHD 2006 diesels, but non for my model. Does anyone know where I can get an exact replacement part or another model that will fit or how to fix the hose? Otherwise my only other option is for me to go the wreckers. Thanks.

This forum seems to have very few posts and most of what's here, seems to be old. Is this because Hondas are so reliable, folk don't ever have to work on them? Thank you! J.

I hope someone can please help me as I'm running out of ideas. My Diesel has a whirring noise in time with the engine revs. It still does it with the drivebelt removed. It's not the turbo . With a stethoscope the noise is definitely coming from the region of the egr cooling valve, but the valve has no rotating parts. It also has pressure when the oil cap is removed but nothing from the dipstick hole. It runs perfectly and doesn't smoke. . The injector washers have been changed. Any suggestions gratefully accepted thanks

Hi guys (and gals). A familiar tale that I suspect has had many posts. My wife’s much loved battered 2003 run around, bought for £1,000, a veteran of numerous trips to the dump and the only car I will park in a supermarket car park had I think made its last journey. Currently sat on the drive (fortunately) but the key will not turn in the ignition. Prevailing view from local garage and RAC is the lock is buggered and quote for a new lock and assembly is £1,000. I did actually, with a squirt of WD40 get the key to turn and fired up the car. Proudly told my wife that I still had the skills but next morning same problem and this time even WD40 wouldn’t fix it. I have als…

Has anyone found an easier way of changing the alternator than the method used I the Haynes manual?

Does anyone have a fuse/relay box like this and if you do can you tell me what the missing relay may and also which is the A/C relay pleae

CRV 2 litre 2003 engine management light TIming chain replaced ...didn't put light off sensors replaced still no joy but then replaced knock sensor with genuine honda knock sensor light went out . Happy finally 😁

Hi All Doe's the subframe have to be dropped in order to remove the turbo charger fitted to a honda crv 2.2 diesel 2005 many thanks madmonk

Hi I have a diesel crv mk11 2006. And I can't seem to find a drivers side (uk) wing mirror glass to fit it. I thought I'd found one on amazon but the back is totally different. HELP!!!

Anyone fitted and wired a Android replacement Head unit to their MK2 CR-V ?

how do you bleed air out the diesel system

Hi Everyone New to the forum, and after a little help if possible please? Anyone know what this part is called please? Need a replacement and not sure what to search for? Thanks in advance

Hi, I bought a new catalytic converter (this one: https://www.partsinmotion.co.uk/car-parts/exhausts/exhausts/bmcatscatalyticconvertertypeapprovedbm91585h-detail) and the mechanic told me it fits but sensor positions do not match, he added that this might make the sensor readings off and that I should get a different one. Has anyone had a similar situation? I was recommended this catalytic converter (BM) brand and I am not sure if I should get a different converter or just fit this one. Many thanks

HI ALL, I'm looking for to buy or recondition stearing rack for 2007 HONDA CR-V I-VTEC ES. Any advice would be very welcome. Thanks, Zibi

Hello there, my keyless entry has packed up,no previous signs of trouble, key remote fob ok, press the button, zilch, no noise, flashing lights or anything. I'm hoping it's a fuse, but I need to get the bonnet open from ouside, anyone got any ideas please?

Anyone know where I can get the tailgate gas strut and little brackets that attach it to the back door and car . ? i have a 2006 CD-Ti . Unfortunately these replacements seem like gold dust , i can get a pair of glass gas struts for about 50p on ebays

Have a new, to me, CR-V - but cannot for the life of me figure out how to get the interior lights to come on when the front doors open. There are just two switches, right and left, on the interior light - and they just turn the individual lights on and off; and if you leave them switehed on they drain the battery. C'mon, I'm missing something here. Will someobody please help me? cheers, Barrie

I have a broken key fob. The metal shaft wobbles about in the plastic part and we have held it together with tape. Honda want over £200 for total new key. Timpson's want £50 for repair. Ebay £12. Advertised as 433 Mhz ID 48 chip (don't know what that means) I have watched vids on the DIY approach and does not seem above my capabilities. Opinions on the way to go please. Thank you

Hello thank you for adding me Hello I am looking for a part for my Honda CRV 1 CTD1 SE 2204 cc 2005 reg Part no 46100SKNE21 Have any of you got any ideas how I can get a new part at all please .. the car is perfectly sound and full service history low mileage ...and I'd really like a part and the garage are struggling to find anything. Thank you

Hi I have a 2005 2.2 CTDI and I suspect that the aircon compressor is failing. I am thinking of simply bypassing air con with a shorter belt and am wondering in anyone has had any experience with this or can advise on required belt length, etc Any advice would be appreciated UK based

Hi everyone, my CRV 2004 Automatic is showing error codes P0135 (O2 Sensor heater circuit Bank 1 sensor 1) and P0131 (O2 sensor circuit low voltage Bank 1 sensor 1). I'm currently browsing three websites—GSFcarparts, EuroCarParts, and Autodoc—to find the correct parts. However, there are numerous variations, making it challenging to decide. For example, on the GSF website, the DENSO LAMBDA SENSOR - 315MM is priced at £150.40, while the same product on the Autodoc website is £40. I'm unsure which one to choose. Can anyone offer advice on which option I should go for? car reg: RJ54OAH