Jump to content

What other wheels fit the frv plz


Recommended Posts

  • 1 month later...


On 11/8/2020 at 12:14 PM, Trix said:

Plz help

Anything with the same PCD, bore, and Offset should fit. As an example, I have a set of S2000 17 inch alloys with summer tyres (225/45/17), and the standard 16 inch FR-V alloys with winter tyres for the cold part of the year - everything other than August then 🙂 The spec for both vehicles matches, so a straight fit without any adjustments - other than lower profile tyres.

There's a very good article which describes PCD, Bore, and Offset at Alloy Guide although you'll probably find other similar descriptions too. Bear in mind that the Bore is the bit in the middle which bears the weight of the car, so even if you can't find a good set with the correct bore, you can always pad it out with spigot rings (as is often the case with generic aftermarket wheels). Personally I prefer genuine Honda as long as they look good, and work properly.

FYI the spec for the FR-V is:

PCD = 5 x 114.3

Offset = 45 to 50

Bore = 64.1mm

 

You'll also find tyre size calculators useful if you go up or down a rim size. Try Wheel Size- it might look a bit techie at first, but once you get the gist of things it's not too bad

If you need wheel spacers, have a look at Superforma - there's also an explanation of PCD, Offset, Bore under the Guides section

 

 

 

 

 

  • Like 1
Link to post
Share on other sites
  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...