BAZZER RN 1 Posted July 7, 2023 Share Posted July 7, 2023 Hi All I have noticed lately that my Crv has developed a squeal when depressing the Clutch Pedal, Had a good look through other Honda Owners comments on this and apparently it can be a problem on some Hondas, The clutch is operating fine, so located the Clutch Slave Cylinder and gave it good dose of WD40 and some 3 in 1 around the rubber seals and the slave cylinder piston, okay its not the same as removing the piston and doing a proper job, but the squealing noise has stopped , and a relief not to get this noise every time, I will let others know the outcome. Have a good weekend Guys & Gals BAZZER RN 1 1 Quote Link to comment Share on other sites More sharing options...
Trevor Posted July 10, 2023 Share Posted July 10, 2023 Good work! Don't think i could manage to maneouver my way under a dashboard anymore you must be more supple than me then 🙂 Let's hope it stays working for quite a while longer Quote Link to comment Share on other sites More sharing options...
BAZZER RN 1 Posted July 10, 2023 Author Share Posted July 10, 2023 Hi Trevor I'm also not so supple as I used to be , please see my Topic on A little Tip which can also possibly work on the Slave Cylinder Squeal Problem BAZZER RN 1 Quote Link to comment Share on other sites More sharing options...
Alan gsd Posted July 23, 2023 Share Posted July 23, 2023 I sometimes have the same on my 2005 CRV I find that if I ride the clutch for a few seconds it stops it for a few weeks. I was told I'm too gentle driving and the clutch gets 'smooth'????? Alan Quote Link to comment Share on other sites More sharing options...
BAZZER RN 1 Posted July 23, 2023 Author Share Posted July 23, 2023 Give the Slave cylinder mech rod under the Clutch Pedal dose of WD40 or as suggested by Trevor on the Forum Alan and see if this improves it BAZZER RN 1 Quote Link to comment Share on other sites More sharing options...
BAZZER RN 1 Posted July 23, 2023 Author Share Posted July 23, 2023 Worth getting a can of Halfords Silicone Spray and giving that a go Alan, It did the job for me BAZZER RN 1 Quote Link to comment Share on other sites More sharing options...
Alan gsd Posted July 25, 2023 Share Posted July 25, 2023 Thanks for the advice guys, I'll try the spray Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.