Eban1969 Posted April 18 Share Posted April 18 Hello everyone,my mum has a little jazz 1,4 auto 2005/6. First, when replacing the brake pads do the caliper piston push in or do they need to be screwed back in. Second, clunky noise when turning left,more when turning rather than sweeping left on a curve, garage doesn't know what the problem is,but have my doubts about said garage. Thanks in advance for any replies Regards Eban Quote Link to comment Share on other sites More sharing options...
Trevor Posted May 2 Share Posted May 2 Hi Eban Only the rear caliper pistons should need winding back - the fronts will just push straight back in. Usually best to release the bleed nipple when retracting the pistons and topping up afterwards. Makes it easier to push in and also removes the fluid that has sat in the caliper which is required to refresh the old fluid every so often. In addition, it does not send fluid back through the system in reverse which can sometimes (but now quite rarely) flip the master cylinder seals and also cause damage to the ABS hydraulic system. The clunking sounds like a worn CV joint which is causing the noise. Quote Link to comment Share on other sites More sharing options...
Eban1969 Posted May 2 Author Share Posted May 2 Thanks for the reply,but sorted now 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.