Honda General Discussions
Talk about anything Honda related!
324 topics in this forum
-
I decided after checking how to access the washer bottle and seek out the leak from the near side headlight washer to leave well alone, however the dribble from the washer down the bodywork started to leave a white mark and annoy me. The dribble was coming from the spray hole and I tried to clean with a pin to see if it was the problem but to no avail. I have now sorted it!! A little bit of Blu Tack stopped it however I didn't like the sight of it so with a bit of trimming of a rubber grrommet and then pushed into the Blu Tack you can hardly tell!! Bodgit alive and well here!!!
-
-
- 2 replies
- 1.6k views
-
-
I've got a Honda Civic Turbo sport (2020 model). It's due it's second service soon. The garage is quoting me £349 for it? Is this correct? It seems a bit excessive. Thanks Lee
-
- 1 reply
- 1.4k views
-
-
Can anyone tell me if the spare wheel well will hold a standard road wheel as I am interested in buying a 2012 Jazz which is up north and it does not come with a spare instead a pump and a can of sealant from new they say,as I intend to do a bit of mileage and would prefer the old fashion spare and would like it to fit in the well and not be too high. Thanks in advance AJ
-
-
- 2 replies
- 2.1k views
-
-
Hi, I recently bought a 1990 Civic EF sedan 1.4 dual carb. Im 19 years old so this is the first car I've ever bought myself, I love the EF sedans and am so please with my new car. Great place to start to get to know about working on cars and such. I am really struggling to get insurance though. I got one day insurance to get it back home when i bought it, but now i'm properly looking into getting insurance for it, it's proving very difficult. It's either a quote so high I cant afford it or it just gets declined :( not sure why as I am not going to be driving this daily as I have a van for work, and its a 30 year old 1.4 so it's slow. If anyone …
-
- 1 reply
- 1.4k views
-
-
Hi all! I have a 2007 Honda Civic Type S, which up until recently has been incredibly reliable! However it has developed an issue with a loud high pitched almost grinding noise when going around bends. This noise is very intermittent and seems to depend on the force of the bend. It does however happen every time without fail on reverse. My father, who is very handy has had a look and is stumped. It has also been into a garage for a quick look and they cannot see anything wrong. Typically they took it for a quick test drive and it didn’t make the noise. I understand the 2007 civics are electrical power steering. My father can see a pipe in the engine which is stumping…
-
- 1 reply
- 1.5k views
-
-
Hello all, I was just enquiring if any one had done this, Im looking to replace my pads with something a little more purposeful and wonder anout ceramics? Mainly as I do trailer and where I live and work I spend a significant amount of time up and down the valleys of wales, with decent down hill stretches. Are these available uk side? 2013 CRV SR 1.6 Many thanks D
-
-
- 2 replies
- 1.7k views
-
-
-
Hi I hope this topic hasn't been posted recently as I couldn't see a search for recent topic. I'm looking for a good manual for repairs preferably a cd manual with good screen shots and step by step guides for jobs to de done on my Honda for when the time comes. The Honda model I have is a diesel 2014 I DTEC Honda Civic 1.6L. I've just bought it from an approved dealer but may want to do some jobs whatever I feel brave enough to do later. All information on the best repair guides appreciated. I couldn't see anything on the Honda website unfortunately. Thanks.
-
- 3 replies
- 2.2k views
-
-
Hello Honda owners, I am in the market for a new car. (Used) I’m thinking of a Honda Civic but here’s where my problem lies. There are so many variants the vtec, I vtec, type r , type S , ES, SI, so I’m hoping someone here can give me some guidance or at least things to look for when buying a civic, thanks for any input
-
- 1 reply
- 1.8k views
-
-
Hello all, I've got to change my rear trailing arm bushes again. I've ordered some that have arrived but they look different to the ones I purchased a couple years ago. The website states that they are for a mk1 crv but I don't understand why they have a different shape?
-
- 1 reply
- 11.6k views
-
-
-
Some great news for you all! Clamping on private land has now been banned in England and Wales so no more cowboy clampers roaming the streets. Check out our story for all the facts http://www.hondaownersclub.com/news/clamping-banned-in-england-and-wales-honda We think this is some of the best news that us motorists could get but what do you think?
-
- 0 replies
- 2.1k views
-
-
-
I picked up my first ever Honda two weeks ago - 2016 1.6 idtec EX. I have noticed that there is a clutch judder when pulling away or if moving slowly in traffic. My last 4 cars have been auto boxes so I first thought it may be my driving style but after a few days I got my son to try it and he too felt that the clutch didn’t feel right. I took it back to the dealer (main Honda franchise) who I bought it from and said I thought there was an issue with the clutch. They tested it and said there was a “slight” judder on clutch engagement but it was “within acceptable limits”. They also stated that it is typical for a CR-V due to the design of the clutch and DMF so conseque…
-
-
- 2 replies
- 1.8k views
-
-
Civic licks the S2000, found a new car for my 10 car garage
-
- 0 replies
- 1.6k views
-
-
Hi , has anyone experienced this. Whilst driving the car will seem to lose power and the engine management light cones on .this lasts a few seconds before all going back to normal . Also this is not a everyday occurrence, perhaps once a fortnight, The car is used daily.
-
- 3 replies
- 2.4k views
-
-
-
I think it's time to replace the battery on my 2006 FR-V (petrol). Looking around I can see various batteries priced from £35-£150, and it looks like different retailers use different codes for the same thing as well. For example there's Powerline 048 which costs less than £40, Yuasa YBX5053 / HSB053 which is around double that or something like Lion 158 Car Battery which falls somewhere in between. As far as I can tell all these batteries would be compatible so are there any advantages of getting the more expensive batteries vs the cheaper brands?
-
-
- 5 replies
- 2.4k views
- 1 follower
-
-
Who said tuning had to be tasteful? LOL.. made me laugh!
-
- 2 replies
- 2.4k views
-
-
Hi BRAZZER RN, how are those new tyres doing are you pleased with the ride etc. Alan
-
-
- 2 replies
- 1.7k views
-
-
Tell us which Honda your driving? We love see see what Honda our members are driving feel free to add pics, videos and let us know how much you love your Honda!
-
-
- 16 replies
- 6.5k views
-
-
Just curious to find out what you guys like about your Honda?
-
- 3 replies
- 3.1k views
-
-
Has any Honda CRZ Owner have experience of reversing a Honda CRZ into what seems to be the common size UK brick built Garage , of 2500 m/m inside wall to wall, door entrance width of 2140 m/m . I sold my Civic VTI 1993 EG6 . which i kept in the garage . And now looking at, Honda CRZ, to purchase , but with no access to, One that i can try to see if i can get it in, the garage . for parking.
-
- 0 replies
- 1.4k views
-
-
Hi all you lovely CRV Members, I am a little disappointed with the response received when a Member asks for some help or advice on a subject or problem they are having with their Honda CRV, I have asked a few questions being new to the Honda Mark and usually the only response I receive is from an Administrator ,which is always appreciated, but look how many others have asked for help and very rarely do they get an answer or at least an educated guess at what the answer might be. I thought I would mention this after looking at how many unanswered question their appears to be on the Forum. So unfortunately I have now resorted to having go to the expensive Main Dealer …
-
-
- 20 replies
- 3.7k views
-
-
Hi, would anyone know where i could purchase a internal seal for 30100-PDA-E02 distributor on my 1999 Accord 2.0 vtec, this distributor is now unavailable and my internal seal is leaking and oil is getting through to my dizy cap.
-
- 1 reply
- 1.5k views
-