CR-V 2007 to 2011
275 topics in this forum
-
I purchased my Honda CRV from a Honda showroom; my sole reason was that my old car was old and high mileage and buying a newish car gives you the sense of security that there will be no fault. I have just hit a year and I have only done 4000 4500 miles on car due to covid reasons I started feeling here gear shift and occasional gear change that felt like two metal plates grinding. so, I took the car into to Honda as I paid for service and its under warranty. they asked me to leave the car for assessing for a day. I got a call back in afternoon car is ok to drive but there might something up, so we need to book it in for 2 days to look in gearbox and clutch. so, I handed m…
-
- 3 replies
- 1.6k views
-
-
Hi, I have the above error code on my 2009 honda crv. It says it's the 2nd clutch pressure switch fault. Has anyone experienced this fault before? If so is it an easy fix? Does anyone know the part number for the switch and where it's located and how to get access please. Thank you.
-
- 0 replies
- 467 views
-
-
The garage has just checked a leak in my power steering and informed me that he cant get the parts due to the age of my vehicle. He suggested I use Google or ask on a forum, so here I am! Can anyone suggest a supplier? It’s a Honda CRV 2007 diesel, I’ve tried Google but I’m not sure what I’m looking for. The mechanic said it was the steel power steering pipes that feed the steering rack which have corroded. Is there anyone on here who could offer some advice? I’m wondering if it’s time to go car shopping but I love my Honda! Thanks in advance
-
- 2 replies
- 1.4k views
-
-
Hi everyone i’m new on this owners club & i’m really looking for some advice regarding my Honda Crv Ex 2.2 CTDi 2008 model. I have had the car less than a year & over the past few months its been getting rougher & tougher going into gear.....i have had the car checked out from my friends in the motor trade & have been told that it was the clutch...just recently i have had the LUK clutch & Dual mass flywheel changed, the slave cylinder twice....it is still the same before this has all been changed, i do understand it is difficult to bleed the system & you have to use a pnematic brake bleeder to do this i have ordered one tomorrow to do it.i have als…
-
- 1 reply
- 2.7k views
-
-
Hi, I 'm trying to replace the AWD relay, as described in Honda service bulletin 15-012, but cannot see how to remove the left interior boot panel (see attached photo). It seems to be a single enormous piece of plastic, but apart from a single clip on the bottom edge I can't locate any other visible screws or clips. Does anyone know how to remove it? Thanks.
-
- 1 reply
- 1.7k views
-
-
C.R Technology manufactured unit (UK) 30% power and torque improvement on the 150 bhp engine Virtually new Contact me for more info if you are interested
-
- 0 replies
- 1.5k views
-
-
Greetings from Ireland. We have just entered entered the world of Honda with the purchase of a 2018 CRV 1.6 DTEC. It was imported from the UK to Ireland by the garage that we bought it from. As things are in KM over here and the car is in miles, we are wondering if there is any way to change the odometer and the gauges to KM? We see that it can be done with other Honda cars, but cannot find out how to do it with this. There is no information about how to do it in the manual. Any help would be greatly appreciated.
-
- 1 reply
- 2.7k views
-
-
Good Morning Folks. I'm getting a clicking noise occasionally about 3 secs after I pull away on my auto CRV. My garage can't replicate the issue but say there is some play in one of the front drive shafts. They are saying that none of the motor factors they use carry them and it would have to be direct from Honda £725.00. They did find somewhere that recon them but they are dubious that they can get the parts to recon it if they send it to them. As the click is only minor at the moment and they cannot confirm that it is that I'm going to wait till it gets worse to confirm it is that and not a wheel bearing maybe. My baby has just hit the 129000 mark so gu…
-
-
- 4 replies
- 2.3k views
-
-
I have a 2016 CRV se plus, i was wondering if it had the option to automatically lock the door at 10 miles an hour as it doesn't do this at the moment. I have looked in the manual and can't find anything about this. Thanks in advance for your help
-
- 1 reply
- 1.9k views
-
-
Hi, The front nearside parking sensor on my 2011 CRV went wrong - dashboard displayed Check System and indicated which sensor was faulty. I replaced the sensor - the problem changed but did not go away. Now I do not get any faulty sensor indications - but as soon as I drop below 5mph - even if nothing within 100 metres of the car - the dashboard indicates that there is an obstacle close by - in other words the sensor reacts. Is there a way of rebooting the system, or maybe the sensor control module is faulty? I have seen these for sale but cannot find where they are located on the car - no mention in any manual I can find. Any suggestions would be appreciated Ma…
-
- 2 replies
- 2.2k views
-
-
-
Hi everyone had my 07 CR-V for a few months now and have just noticed the rear end has dropped both sides equal and only just missing the tyres drives fine no shakes or bangs haven’t had a chance to get under it yet but any ideas? cheers
-
-
- 3 replies
- 2.5k views
-
-
Hi, I am new to this site and this is my first post. Although I have been driving for 25+ years I am a total novice when it involves anything more than the aesthetics of a car. So I would greatly appreciate any advice please. I have recently purchased a 2009 Honda CR-V i-CTDI which I'm really happy with. However I need to replace an interior bulb above the rear view mirror. I have removed the non working Festoon bulb which states 'Kelly 12v 8w' on it but I am having real difficulty in sourcing a new bulb. All I can find are 12v 10w Festoon bulbs and I am concerned they may do damage to the car. I did look at LED bulbs but again they are only 10w and I've he…
-
- 2 replies
- 2.4k views
-
-
Just wondered if anyone knew if the US rear wiper motors are the same as the UK. The reason I'm asking is that a new one from the US on Amazon is £70, about the same price as a secondhand one in the UK.
-
- 0 replies
- 1.1k views
-
-
Hi I have a 2012 crv and need help wiring my tow bar lighting socket, all help appreciated
-
- 1 reply
- 5.9k views
-
-
I'm looking at purchasing a CR-V 2.2 diesel but confused with the car tax. How come some cars tax costs are only £165 per year and others of the same model £205 per year? The cheaper car to tax is also better on economy, I can't see any info on the matter and seeing as though they are the exact same engine and same year I'm at a loss. Any help will be appreciated.
-
- 1 reply
- 2.1k views
-
-
Hi new to the site can any help with how to recode a replacement electrical steering rack
-
- 1 reply
- 1.1k views
-
-
Hi all, I’m in desperate need of help. I can’t disable the Immo on my 2007 CRV. I’ve changed the battery in the fob and on the car, I’ve checked all the fuses, tried to reprogramme the keys, all keys lost, bought a second hand replacement key fob reader on the key cylinder tried to reprogramme it, cried, kicked it, and still nothing. The maxicom tells me that the system is “not normal”, without any hint on what else is going on. I have a green flashing key constantly and an engine management light that comes on initially, blinks and goes out it turns over but doesn’t fire up. The local Honda garage is 40 miles away and the RAC will only take…
-
-
- 3 replies
- 3.2k views
-
-
So in rolling a slightly beat up 09 plate and it's the best car I ever had
-
- 5 replies
- 2k views
-
-
Hi all,I have a 2013 2.2dtec auto with 80,000 on the clock.It is the first time I have had it serviced in my ownership and a bit puzzled at what sensibly needs doing.Does it need brake fluid,transmission fluids,fuel filter etc?.I have had a few quotes,I am told it needs new discs and pads all round as well as a service,approx £730 seems to be the going rate??...any advice please..cheers,Phil.
-
-
- 2 replies
- 2.9k views
-
-
My 2009 2L petrol CRV has just had a new serpentine belt fitted by the local independent garage I have used and trusted with all my cars, BUT I think its been fitted incorrectly in that the flat side of the belt is riding on the ribs of the AirCon pulley. I am going to take it back and get it checked. My question is where can I find a diagram of how it should be routed? I've looked everywhere on the internet and can only find US spec ones and diesel ones with the power steering pump of course I don't have!
-
- 4 replies
- 2.9k views
-
-
Hi I’m struggling to to figure out the inlet and outlet terminal on the dpf pressure sensor on my 2010 crv .. which is the inlet pipe the top or bottom on the mounted sensor
-
- 1 reply
- 2.9k views
-
-
Hi everyone, New to the forum but wanted to get some ideas: I have a 2012 CRV 2.2 Diesel manual with 60k miles. On a recent service (at a Honda dealer) they advised that it needs a new clutch. This seems a bit odd to me as the reason given was that the clutch bite was high. It does not have any symptom of the clutch failing such as power loss or difficulty engaging gears. The only thing which could indicate a problem is a very slight, intermittent judder changing between 1st and 2nd gear but this was not mentioned. The other issue is that the middle display (centre top of the dashboard) for range and MPG is blank. The display itself wor…
-
- 3 replies
- 2.2k views
-
-
Hi My 2012 crv es model has blown fuse 10 (7.5 amp) 3 times, usually happens when turning right lose all dash info and indicators, if engine switched off it will not restart until fuse replaced. Honda specialists couldnt find cause, and i am losing confidence in this vehicle. Help please Alex
-
- 2 replies
- 2.2k views
-
-
Hi I have been looking around for the recommended intervals to change the differential fluid on the 2.2 dtec 2014 car. My car has only done 55k now and struggling to find any info on it?
-
- 1 reply
- 3.1k views
-