Honda FR-V Club
Discuss the Honda FR-V
166 topics in this forum
-
This is not a step-by-step, just a brief overview aimed at pretty competent mechanics ; I could have done with this info to speed up changing mine. Honda wanted 1.100€ here, parts and labour ; the same Denso DAN985 is available on the net for 246€, it took me 4 hours including making the belt-tensioner tool, and next time would be less than half that. There's a series of pictures on the French Cardisiac forum, here, with a French text that is pretty inaccurate. https://forum-auto.caradisiac.com/topic/93607-tuto-révision-complète-honda-frv/page/2/ Look around 18th October 2018. It also shows the revised belt-layou…
-
- 2 replies
- 4.2k views
- 1 follower
-
-
The Honda FR-V (Honda Edix in Japan) is a six-seater compact MPV introduced by Honda in 2004 and marketed until 2009. Alongside the Fiat Multipla, it is currently one of only two compact minivans with a 3+3 seating configuration available on the European market. Engines The FR-V is available with three gasoline and one Honda diesel-powered engine. 1.7 i-VTEC - 125 hp (93 kW; 127 PS) at 6300 rpm and 154 N·m (114 lb·ft) 4800 rpm 1.8 i-VTEC - 138 hp (103 kW; 140 PS) 2.0 i-VTEC - 150 hp (112 kW; 152 PS) at 6500 rpm and 192 N·m (142 lb·ft) at 4000 rpm 2.2 i-CTDi - 140 hp (104 kW; 142 PS) at 4000 rpm and 340 N·m (251 lb·ft) at 2000 rpm The 1.7 i-VTEC and 2.0 i-VTEC were …
-
- 4 replies
- 16.6k views
-
-
HI everyone, I have a 1.8 Frv with 140k on clock, family owned from new. Very recently I can see inner tyre wear on both front tyres inner edges. Car drives ok and no unusual sounds when on steering. I'm away on holiday ATM so can't talk a proper look, or provide any pics. Recent Mot pass no advisors. Has anyone else come across this issue, I'm suspecting some kind if suspension issue. Thanks. Chris
-
- 9 replies
- 8.4k views
- 1 follower
-
-
-
Hi everyone, had a FR-V for a week now, 2.2 diesel, 103 k miles, plenty of history. Anyway, OSF front brake seems to be binding and getting slightly hotter than the other side, it's not as bad since I've cleaned everything, greased the slide pins, rotated the piston and pushed it back and put a bit of brake fluid under the dust seal. I might have to puta caliper on if it doesn't settle down. Looking at the history it has niffin brakes on the back and sumitomo on the front, is this normal? Also i can't find a sumitomo replacement caliper. Coxs honda lancaster say they aren't available anymore. I take it i need to fit a sumitomo caliper as a niffin wouldn't fit? …
-
-
- 2 replies
- 7.9k views
-
-
Hi, My FRV car alarm is constantly sounding. The key fob locks and unlocks the doors, and the car can be driven, but the alarm keeps on sounding intermittently. The car alarm must have drained the battery, which has been replaced. I have changed the batteries on the key fob, and tried disconnecting the sensor attached to the bonnet mechanism/ lock. Nothing seems to work. If anyone has encountered this, and can suggest a fix, I'd be very very grateful! Thanks
-
-
- 2 replies
- 7.5k views
-
-
Hi ! I'm in the UK and have a Honda FRV 2005. So basically my heater blower has stopped working. I have replaced the resister pack and that has not fixed it. The fuse is fine too. So now I am trying to replace the actual blower motor itself. I have unscrewed the 3 screws holding it in place but it cannot drop down far enough for me to pull it out because the ECU is in the way. So, now I need to remove the ECU from its casing, which is directly below the blower. Once this is removed there will be enough room for the blower to drop down. There are 2 screws/bolts at the front of the ECU, one on each side, I have taken these off however there is something else …
-
-
- 2 replies
- 7.2k views
-
-
My windscreen washer has stopped working. The rear window washer still works. Is there a fuse I should check? How do l get at the pump?
-
-
- 10 replies
- 7.1k views
-
-
Hi all, can back to my 06 frv yesterday in a car park and found the drivers side mirror had been fully pushed back. Normally when this happens can usually just push it back and after a few attempts the power folding sorts itself out and gets in sync. However this time the whole mirror is just flimsy and can be folded in by hand and easily. When turning the car on can hear the motor in the mirror whirring away constantly and doesn’t stop and power folding does not engage. is this fixable or should I look for a replacement mirror? Does anyone know how to take the mirror unit apart and what I should be looking for?
-
- 1 reply
- 6.9k views
-
-
After 15 years of owning the FR-V in London, my catalytic converter was stolen yesterday. Really pissed off. Having seen a post from here the uk.hondaownersclub.com. I've bought a replacement from https://catman.co.uk/ I'm not a mechanic, so hopefully it will have all the bits I need. Then its just another waiting game, as it might get stolen again. Is this be coming more common?
-
- 2 replies
- 6.8k views
- 1 follower
-
-
Hi all, my wife has an FR-V which the blower motor packed up on. I tried the regulator first but it turned out the fan was broken so I sourced a replacement which is working. The controls on the dash increase and drop the fan speed fine. The issue is that we're not getting any air out of the screen demist vents or any of the cabin facing vents - sides , middle or downward. I've taken the filters out behind the glovebox and am getting good airflow there. I can see the flaps opening when I put the screen fan on and cycling through the downward and forward facing options see the actuators changing. I have spotted 3 of them and all seem to be operating. Can…
-
- 2 replies
- 6.3k views
- 1 follower
-
-
Hello everybody, I am looking for front shock absorbers for my FRV. Where do you buy them? I can only find te oem ones,aftermarket nothing. I read somewhere that the shocks of a certain Civic model might fit. Ideas? Tips? Thanks😁
-
-
- 14 replies
- 6.3k views
-
-
Hi, The retaining nut at the top of one of the support piston has come undone and dropped inside the body/window trim! How can I get to the innards to retrieve and refit the nut? Any help would be appreciated!
-
- 0 replies
- 5.9k views
-
-
On DVLA assignment form with transfer fees paid Make me an offer! Thanks
-
- 0 replies
- 5.5k views
-
-
Hi, does anybody have any experience of this? my blowers have stopped working. I have checked all the fuses and the resister. All is working. Does anybody have any suggestions? thanks
-
- 1 reply
- 5.4k views
-
-
-
The indicator relay went on my car so i had it replaced and since the new one has been fitted my abs light comes on when I brake, the headlight light on the dash comes on when I brake if I have my lights on the brake lights are on all the time and my glow plug light is flashing. Could it be the relay that's causing the problem or is it a wiring problem? I didn't have any problems before the relay was changed. The car has just been serviced and passed it's mot
-
- 1 reply
- 5.1k views
-
-
Hi there. I own a Honda Frv 54 plate. My nearside rear abs sensor is faulty and I can't for the love of god find anybody that sells a replacement ! Are there any other Honda vehicles that share the same abs sensor ? Please help as I'm beginning to lose my mind.
-
-
- 7 replies
- 5.1k views
-
-
Hello guys Just has a quick question, I've recently upgraded my headunit to a new pioneer double din, ive used the connect 2 interface and the new stalk patch lead for the steering wheel control however my controls for the stereo do not work, the green plug which plugs into the back of the original factor stereo remains untouched as I am not sure if it has the cruise controls connected to it as well. Could you guys help me understand how to get the steering wheel controls to work pls Many thanks
-
-
- 6 replies
- 5.1k views
-
-
I've been having charging/battery problems over past few weeks, resulting in a no start after a short drive..... normally solved by a 10 min drive after a quick push or jump start. It's now apparent that the alternator doesnt work, hence requires changing. Looking at the alternator and its location makes me think this is a major job as it's in a very tight area to get to. Any help or pointers would be marvellous
-
- 1 reply
- 4.9k views
-
-
I have a 58 plate FRV 2.2 iCTDi and need to find the location of my oil pressure switch. Can you help?
-
-
- 1 reply
- 4.9k views
-
-
Hi I am really hoping some one can help me out. VSA light is on and won't go off paid some one to plug her in and it is saying faulty Yaw rate sensor but no one knows where it actually is in my car not even honda garages could tell me. So do any of you lovely F-rv owners know exactly where we will find it to be able to replace it. (Im sick if lights on the dash and my MOT is looming.) Thank you in advance if you can help.
-
- 0 replies
- 4.9k views
-
-
Hi everyone i have a FRV 2005 plates the engine check light is on and is giving a fault code temperature sensor 2 fault the connection is corroded can any one suggest where i can purchase one or i have to buy a complete harness
-
-
- 5 replies
- 4.9k views
- 1 follower
-
-
Hi All I have a 1.8 petrol honda FR-V 2008 with an engine light on. Code P0135 Air fuel ratio (A/F) sensor (sensor1) heater circuit malfunction. I am struggling to find this part. I have taken it to my local garage and he ordered the part but the connector was wrong ( female socket required, see pics) Hes struggling to find it. does any know the part number and where i can buy the part ? let me know if you need any more info. i have attached some pics, hopefully there not too big/small. He believes its the top sensor (he couldnt disconnect the bottom one so only tested the top one). pls help me find …
-
- 0 replies
- 4.8k views
-
-
Hi, our lovely Honda FRV 2.2 diesel is having difficulty getting in first and second gear. Sometimes you have to dip the clutch 2 or 3 times to select the correct gear. Any thoughts or opinions welcomed?
-
-
- 6 replies
- 4.8k views
-