Everything posted by Trevor
-
P0325 error code Honda CRV 2005
Hookies Possibly a knock within the engine being read by the sensor or if there is any interference going to the sensor via the lead?
-
O2 sensor issue
I guess they would have yanked the O2 sensor connection to release it rather than disconnecting it so would be worth looking at the connection and wiring going to the vehicle loom
-
valve clearances
You would not really need to adjust valves on modern Honda engines. Unless you have issues with noisy valve-train then it shouldn't need touching
-
2016 1.6 dtec 4wd auto doesnt use 9th gear
A remap of the engine ECU could cure this. Found when I remapped my CR-V for economical and driveability reasons that the gears had 'longer legs' and contributed to better gear usage
-
Hello from Romania & Speedometer question
Check for broken earth cables connecting from the battery negative terminal to the gearbox/engine and other associated wiring as excess engine movement could be affecting the connection?
-
Honda accord 2013
Definitely wheel imbalance....take it to a tyre bay who can rebalance the wheels
-
Bcm (body control module) location
Usually located in the kick panel area on the front bulkhead
-
Buying My First Civic - Need Advice
Hi....welcome to the Club! That sounds like a perfectly reasonable price for what would be a great little runabout/work horse. Let us know how you get on with acquiring it
-
Engine management light
I would say that a carbon clean from a company like TerraClean would sort these issues. Sounds like carbon build up in the intake side of the engine
-
Honda Jazz Windows problem
I would stand my ground on this one as it is clearly a known fault and if they cured one side then they can do the other as its the same issue. Let us know how you get on with it
-
Charge for a service
Hi Lee....welcome to the Club The price for the second service is usually more because of the level of work and parts is greater. Compared to a second service on my Harley, that price you quoted is cheap 😞
-
Hello from Wicklow Ireland.
Hi Bosco....welcome to the Club Superb couple of Honda's you have there and huge amounts done to them. Good to have you onboard!
-
Hi From Ferndown Dorset
Hi BAZZER RN 1 ....welcome to the Club! You can't go wrong with a CR-V, superb car with huge reliability. The X-Type is also a great car to drive but not as reliable as the Honda unfortunately. Good to have you onboard!
-
Faulty clock on CRV
There has been an issue with Honda clocks where it has been resetting to the year 2001 so may be related to this?
-
Hello from Reading (FR-V owner)
Hi Steve.....welcome to the Club Just goes to show how reliable the Honda FR-V really is. Same goes with most of the Honda range, all good cars! Good to have you onboard and some other members from Honda Karma have found their way here
-
Hello from Durham
Hi Dick....welcome to the Club You certainly enjoy your CR-V's then if this is your fourth one. Good to have you onboard!
-
FR-V Immobiliser issue
It could be the immobiliser control unit as some Honda models seem to suffer this issue. You can get a replacement unit and key to match secondhand and fit yourself
-
Honda Civic (2004) 1.6 Sport
Ebay link to advert: https://www.ebay.co.uk/itm/203927078335
-
Service for approved used car
It sounds like it wasn't serviced before you bought it then I would argue this if it is the case as the vehicle should have been checked over before sale
-
Hello from Berkshire
Hi.....welcome to the forum! Good to have you onboard.
-
Hello from derby
Hi Mark Good to have you onboard
-
Tourer tailgate closing
Maybe worth removing the trim from the tailgate as had the same issue on a Toyota recently and found a plastic clip had dropped into the latch mechanism and was stopping it from closing
-
Accord cu2 (2.4 ivtec) 2010
I would check the plugs to see they are not wet when cranking over the engine Also check the plug gaps are correct
-
Radio upgrade
iceboxautos are a good supplier of aftermarket audio designed to fit the CRV model you have
-
Roof Bars or Rails?
Have heard they do the job well but not sure about quality